Programming Function - TechniSat DIGITRADIO 360 CD Instruction Manual

8.9 Programming function

With the programming function, you can play up to 32 tracks on a music CD or 64 tracks on an MP3/WMA-CD
in an order determined by you.
You can only carry out programming if there is a disc in the closed CD compartment and the device is
in stop mode.
> Access the stop function via the < (32) button on the remote control.
> Press the PRESET (18) button on the remote control.
On the display (for a normal audio CD) you will see Memory, the track number "T01" flashing as well as "P01."
> Use the TUNING s/97 or TUNING r/8: (45, 25) buttons on the remote control to select the first
track to be programmed.
> Save the desired track number with the PRESET button. The track is now programmed to programming
slot 01.
The display now shows the number of the next programming slot. Programme the desired sequence of tracks
in the same way.
> Press 4/; (31) on the remote control to start playing the selection. The display shows MEM, the
current track number and the playing time.
> If you would like to interrupt the playback of the programmed selection, press button 4/;once.
> To end the programmed playback, press the < button.
If you open the CD compartment or activate another source, the programme memory is deleted. The
programming function is also ended by pressing the < button twice.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
43 43