Operator Manual
► CASE 2: Removing jam from the Front Transport Path
1. Open the upper unit (refer to "Opening Upper Module").
2. Open the Customer Service Module and remove the jammed bill from the lower side (refer to
"Opening the Customer Service Module").
3. If the jam occurs in the Gate section, remove the jammed bill.
4. After removing the jammed bill, close the Customer Service Module and the upper unit (refer
to "Closing Upper Module" / "Closing the Customer Service Module")
© Hyosung TNS Inc. All Rights Reserved.
Chapter5. Bill Recycler (BRM58)
5-27