Clear The Jammed Paper In The Presenter - HYOSUNG MONiMAX8100QTN Operator's Manual

Operator Manual

Clear the jammed paper in the presenter

► When any of the following cases occurs, please remove the paper manually:
Paper is jammed into the path of Presenter;
Paper does not enter the paper output path of presenter.
► Remove the jammed paper manually in the following steps:
1. Press the snap-fit on Pre upper path as shown in the following figure and apply force upwardly to
remove the Presenter top cover;
<Clean the jammed paper in the Presenter>
2. Take out the jammed paper and install the Pre top cover to the printer.
© Hyosung TNS Inc. All Rights Reserved.
Chapter4. Receipt Printer (SPR60)
4-13