HYOSUNG MONiMAX8100QTN Operator's Manual page 49

Operator Manual
Before loading paper, make the paper flat to ensure the paper be fed smoothly into the path.
<Radian of paper head>
Semi-automatic paper loading
1. Turn on the power and the ERROR LED alarms for paper end;
2. Refer to the figure below, push paper into the paper inlet for a certain distance, and release your
hands when the platen roller starts rotating and holds the paper.
3. The printer starts loading paper, and then the printer can execute print tasks after finishing loading
the paper and the paper head stops at the normal print position
Caution:
Push the paper into the paper feeding path with well-distributed and gentle force and try to make the
paper head parallel to the paper feeding path. If the angle between paper center line and the printer
center line is≤4°, it can guarantee that the paper jamming malfunction will not happen.
<Paper loading>
© Hyosung TNS Inc. All Rights Reserved.
Chapter4. Receipt Printer (SPR60)
4-11