Riso GOCCOPRO QS2536 User Manual page 47

The procedure for registering the screen frame
size is indicated below.
1
In the [Devices and Printers] dialog box,
double-click the [RISO GOCCOPRO
QS2536] icon.
2
In the [RISO GOCCOPRO QS2536] dialog
box, click [Printer], and select [Properties].
3
In the [RISO GOCCOPRO QS2536
Properties] dialog box, click [Frame size
entry] on the [Environment] tab.
4
In the [Frame size entry] dialog box, set
the screen frame size.
Configure the settings according to the
screen frame to use.
The unit of measurement can be
switched. Enter the value in incre-
ments of 1 mm (0.01").
4. Setting the Printer Driver
5
Register a name for the screen frame size.
Enter a name, and click [Add].
The registered name is shown in the list.
y To erase a registered screen frame
size, select the screen frame size
and click [Clear].
y To change the order in which a
registered screen frame size is dis-
played, select the screen frame size
and click [Move Up] or [Move Down].
6
When the settings have been made, click
[Close].
7
In the [RISO GOCCOPRO QS2536
Properties] dialog box, click [OK] on the
[Environment] tab.
45