Setting The Screen Making Process In The [Layout] Dialog Box - Riso GOCCOPRO QS2536 User Manual

4. Setting the Printer Driver

Setting the Screen Making Process in the [Layout] Dialog Box

Set the screen making process in the printer settings dialog box when performing printing in an application.
Select [Layout] from the drop-down list to show settings regarding the screen making process.
Item
Mirror Reverses the image
A
Image 2
B Rotation 2 Rotates the image
The offset width of
Offset (Left the screen making
C
or Right) position (in the left/
The offset width of
Offset (Top the screen making
D
or Bottom) position (in the top/
bottom direction)
Displays a preview of
E Preview 3 the image for screen
The underlined value of the setting range indicates the default value.
1 Enter the value in increments of 1 mm (0.01").
2 See the appendix for information on how the output result (screen making direction) differs according to
the combination of [Rotation] and [Mirror Image].
Rotation/Mirror Image u P. 77
3 Details on the preview function are described separately.
Preview u P. 19
54
Description Setting Values
horizontally
right direction)
making
OFF
Select the desired item from the drop-
down list.
ON
OFF
Select the desired item from the drop-
90-degree
down list.
180-degree
Select [Right] or [Left] from the drop-
OFF
down list, and enter the offset width in
Right
[Offset width (Left or Right)].
Left
Setting range: 0 mm to 700 mm (0" to 28.00")
Select [Top] or [Bottom] from the drop-
OFF
down list, and enter the offset width in
Top
[Offset width (Top or Bottom)].
Bottom Setting range: 0 mm to 700 mm (0" to 28.00")
Select this check box to enable this
OFF
setting, and the preview is displayed in
ON
the [Preview] dialog box.
Details
1
1