Manually Installing The Printer Driver; Manual Installation Procedure (Windows) - Riso GOCCOPRO QS2536 User Manual

Appendix

Manually Installing the Printer Driver

This section describes the procedure for manually installing via a USB cable connection (without using the
installer).
Manual Installation
Procedure (Windows)
y To install the printer driver, it is necessary
to log on to Windows with an account (Ad-
ministrator, etc.) that has the authority to
change the system settings.
y This printer driver does not support printer
sharing.
1
Turn the power of the screen maker on,
and connect a USB cable.
2
Start the computer.
3
Connect the USB cable to the computer.
If you are using Windows 7, do not proceed
to the next step until [Device driver software
was not successfully installed] appears on the
task tray.
4
Start [Device Manager].
Click [Control Panel] > [Hardware and
Sound] > [Device Manager].
5
Click [Other devices], right-click on the
screen maker name, and select [Update
Driver Software] from the displayed menu.
For Windows 10 / Windows 8.1
If the name of your screen maker is not dis-
played, click [Action] > [Scan for hardware
changes].
6
Click [Browse my computer for driver
software].
7
Insert the included "RISO GOCCOPRO
Printer Driver" CD-ROM into the CD-ROM
drive of your computer.
76
8
Click [Browse], select the following folder,
and then click [OK].
y For a 32-bit operating system:
(CD-ROM) > [Windows 32-bit] > [Driver] >
[Windows] > [English]
y For a 64-bit operating system:
(CD-ROM) > [Windows 64-bit] > [Driver] >
[Windows] > [English]
9
Select your screen maker from the list,
and click [Next].
10
Click [Close], and reboot the computer.
11
Click [Control Panel] > [Hardware and
Sound] > [Devices and Printers], right-
click on the installed printer, and select
[Printer Properties] from the displayed
menu.
12
Click [Print Processor] on the [Advanced]
tab.
13
Click the following print processor from the
[Print processor] list.
y For a 32-bit operating system: R35V8RP
y For a 64-bit operating system: R35V6RP
14
Select [NT EMF1.008] from the [Default
data type] list, and click [OK].
15
Print a test page from the [General] tab.
16
Click [OK] to close the dialog box.