How To Replace Fuses - Braillo 300 S2.1 User Manual

BRAILLO
l
7.3

How to replace fuses

The fuses are placed on a PCB inside the electric unit. See figures below for how to open the box.
Remember to disconnect the mains cable first!
To get more room to inspect and replace the fuses, it is best to move the power supply a little out of
the way. This can be done without disconnection the wires. See figure below:
To release the power supply, place a
screw driver here and pull the latch
downwards
98
Power supply
B 300 S2.1
Unscrew all screws