Magnet - Replacement - Braillo 300 S2.1 User Manual

BRAILLO B 300 S2.1
l
5.5

Magnet - replacement

Please observe that the numbering on the magnets in a magnet rack, always starts at "one" at the
end where the connections are. (It does not refer to dot number, character number or column num-
ber!).
Disassemble the magnet rack like described in section 5.4 'Magnet rack - disassembly, step by step' on
page 60.
Next, follow the instructions below.
Step 1.
Remove the five screws holding the list, and the list.
List
62