Magnet Rack - Cleaning - Braillo 300 S2.1 User Manual

BRAILLO
l
5.6

Magnet rack - cleaning

Remove the magnet rack as described in section 5.3 'Magnet rack - removal' on page
Then disassemble the magnet rack as described in section 5.4 'Magnet rack - disassembly, step by
step' on page 60.
Now use a damp cloth moistened with cleaning alcohol to wipe off the surfaces as described in the
figure below:
Note! Never oil, grease or lubricate any of the moving parts on a magnet rack!
This will only attract paper dust and cause clogging.
The support list
The iron pieces in
the long pivot arms
B 300 S2.1
59.
Magnet poles on
the magnets
At the back of the long
pivot arms
65