Beam And Paper Shoes - Removal And Refitting - Braillo 300 S2.1 User Manual

BRAILLO
l

5.10 Beam and Paper shoes - removal and refitting

To remove the beam and paper shoes, some other parts must be removed first. It must be done in
this order:
1. Remove the belt
2. Remove the inside paper guide
3. Remove the paper feed tractor
4. Remove the top frame
5. Remove magnet rack A and B
1. Remove the belt
This is done by loosening the bolt for the belt
tensioner. When this is done, the belt can be
lifted off the upper cogwheel. Please see figure
to the right.
2. Remove inside paper guide
See "5.19 Input paper guide - removing" on page 84 for information on how to remove the inside
paper guide.
74
Loosen this bolt to
take off the belt
B 300 S2.1
Inside paper guide