Paper Feed Assembly - Adjustment - Braillo 300 S2.1 User Manual

BRAILLO B 300 S2.1
l

5.17 Paper feed assembly - adjustment

If for some reason the paper feed mechanism has been disassembled it could be that the paper will
not stop correctly by the marks on the paper guide.
Therefore, it is necessary to adjust the relation between the paper parking position and where the
stepping motor is parking.
Loosen the paper feed shaft by unscrewing the two left-hand screws (A) on the sensor wheel.
Note! Do not loosen the screws for the stepping motor shaft.
Put a sheet of paper into the tractors on the paper feed.
Now the tractor feed shaft can be turned forward or backward until the paper is in the desired posi-
tion.
Tighten the screws (A) again.
A
82