Steelcase Elective Elements Gate Leg Assembly Instructions Manual page 6

Back to Back Applications Only
1.
Clamp the individual leg to the assembled leg ensuring that both legs are
aligned in all directions.
2.
Using the existing holes in the individual leg as a template, drill through
into the assembled leg using a .125" drill bit. (Depth not to exceed 1.375").
3.
Attach the bracket and individual leg to the assembled legs using two (2)
8-18 x 1.250" sheet metal screws.
2
8-18 x 1.250
SHEET METAL SCREW
3
Tip: Make sure that the
torque control drill is set
properly to prevent stripping
of screws.
1
Page 6 of 7
939568007 Rev B