Steelcase Elective Elements Gate Leg Assembly Instructions Manual page 2

Assemble Gate Leg
1.
Carefully turn table top over onto clean, soft surface.
2.
Remove brackets and screws from hardware package.
3.
Attach brackets to legs. Ensure that the channel in the
bracket faces up (toward the thick plate). Use the 8-32 x .375"
tri-lobe screws to attach the brackets at pilot hole locations.
Tip: Make sure that the
torque control drill is set
properly to prevent stripping
of screws.
3
REPEAT FOR OTHER LEG
Page 2 of 7
939568007 Rev B