HIKVISION TURBO HD U7T Series User Manual page 9

4. Install the camera on the junction box's cover with
three PM4 × 10 screws.
5. Install the junction box's body to the ceiling/wall
with supplied screws.
Figure 2-12 Install the Junction Box to the Ceiling/Wall
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Install the junction box's cover back to its body with
supplied screws that on the junction box's cover.
Figure 2-13 Install the Junction Box's Cover back to its
8. Repeat the step 5 and 6 of 2.2.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
Body