HIKVISION TURBO HD U7T Series User Manual page 7

Figure 2-6 Secure the Junction Box to the Wall/Ceiling
7. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
8. Combine the junction box cover with its body.
Figure 2-7 Combine the Junction Box Cover back to its
9. Repeat the step 5 and 6 of 2.1.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template to the place where you want
to install the camera.
2. Drill the holes according to the drill template.
Note:
Drill the cable hole in the center of the drill template,
when adopting ceiling outlet to route the cable.
3. Route the cables through the cable hole.
4. Install the camera to the ceiling/wall with supplied
screws.
Junction Box
Body
Figure 2-8 Drill Template
Body