Rotor; Disassembling - Makita DLS714 Technical Information

4.4.3. ROTOR

4.4.3.1. DISASSEMBLING

(3) Motor housing section
1R269
1R041
1R041 (25)
Handle section
Figure 26
(28)
Figure 27
Motor housing section
Figure 28
1R269
(22)
Figure 29
1. Remove six M5x45 Pan head screws (3), then remove
Handle section and Motor housing section.
2. Remove Ball bearing 629DDW (28) with 1R269.
3. Clamp the flats of Rotor ass'y (25) with Vise and two
1R041 and pull off Motor housing section.
Note: Do not cramp Gear section.
4. Remove Ball bearing 607DDW (22) with 1R269.
October 2015
20 / 47