Assembling - Makita DLS714 Technical Information

12. Bearing box section can be disassembled as shown above:
• Spindle (56)
• Ball bearing 6201DDW (55)
• Bearing box (54)
• O ring 46 (53)
• Ring 12 (52)
• Helical gear 53 (51)
• Retaining ring S-12 (49)
• Ball bearing 607DDW (48)
Note: Removed Ball bearing cannot be used again because it will always be damaged when removed.

4.4.6.2. ASSEMBLING

(54)
(55)
(56)
1R164
(55)
Figure 49
1R028
(55)
(56)
1R036
Figure 50
(52)
(53)
Figure 48
1. Put 1R164 onto a new Ball bearing 6201DDW (55) and
press 1R164 with Arbor press to press-fit Ball bearing
6201DDW (55).
Note: Be sure to replace the removed Ball bearing with a
new one, because the removed one is damaged.
2. Put Spindle (56) onto 1R036.
3. Put 1R028 onto Ball bearing 6201DDW (55) and press
1R028 to press-fit Ball bearing 6201DDW (55).
October 2015
(48)
(51) (49)
27 / 47