Switch Section, Controller Section; Disassembling - Makita DLS714 Technical Information

4.4.5. SWITCH SECTION, CONTROLLER SECTION

4.4.5.1. DISASSEMBLING

(11)
Battery fuel gauge
section
(4) (3)
(9)
(12)
Figure 35
Terminal B
(1)
Figure 36
(29)
Figure 37
1. Remove three 4x18 Tapping screws (11), then remove
Handle cover complete (12).
2. Remove Battery fuel gauge section and Terminal B from
Handle set (1).
3. Remove six 4x18 Tapping screws (4) and three M5 x45
Pan head screws (3), then remove Handle set (1).
4. Remove Switch (9) and Controller complete (29).
October 2015
23 / 47