4.4.8. SAFETY COVER
4.4.8.1. ASSEMBLING
Tail
portion
Elliptical
hole
Center
cover's hole
Figure 59
(66)
(67)
(68)
Four bosses
Figure 60
End of Spiral
spring 26 (67)
Figure 61
1. Insert the tail portion of Spiral spring 26 (67) into the
elliptical hole of Safety cover (68).
(67)
(68)
2. Mount Center washer (66) to Safety cover (68) by
aligning its holes with four bosses of Safety cover (68).
3. Apply Makita grease FA No.2 a little on the whole of
Spiral spring 26 (67).
4. Mount Center cover (63) by inserting the end of Spiral
spring 26 (67) into Center cover's hole.
(63)
October 2015
31 / 47