Makita DLS714 Technical Information page 25

(46)
Bearing box section
Figure 41
Figure 42
1R291
Figure 43
1R356
1R258
Figure 44
1R269
(48)
(49)
1R032
(56)
(51)
(54)
1R258
3. Tap Blade case complete (46) with a plastic hammer,
then remove Bearing box section.
Note: Be careful not to drop Bearing box section.
4. Remove Ball bearing 607DDW (48) with 1R269.
5. Remove Retaining ring S-12 (49) with 1R291.
6. Insert a set of 1R356 between Helical gear 53 (51) and
Bearing box (54), and put them on two 1R258.
7. Put 1R032 onto Helical gear 53 (51) and give shock with
Arbor press.
October 2015
25 / 47