Installing Child Restraint System Using A Seat Belt - Toyota Rush Owner's Manual

◆

Installing child restraint system using a seat belt

Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
1
Place the second seat at the
4th lock position from the
rear most position. (→P. 123)
1
4th lock position
2
Rear most position
2
Adjust the seat back to 3rd
lock position from the most
upright position. (→P. 123)
1
Most upright position
2
3rd lock position
3 If the child seat cannot be installed due to interference between
the head restraint and the child seat, set the head restraint to the
upper most position or remove it. (→P. 127)
4
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Securely
fix the seat belt to the child
restraint system in accor-
dance
enclosed
restraint system.
RUSH_OM_General_OMBZ265
to the directions
with the child
1-2. Child safety
KBTE110723E
KBTE110712E
KBTE110708E
61
1