Installing Child Restraint Using A Seat Belt (Child Restraint Lock Function Belt); Rear-Facing - Infant Seat/Convertible Seat - Toyota RAV4 Hybrid 2018 Service Manual

66
1-1. For safe use
Installing child restraints using a seat belt (child restraint lock
function belt)
Rear-facing ⎯ Infant seat/convertible seat
■
1
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
If your child restraint system interferes with a head restraint and
cannot be installed properly, install the child restraint system after
removing the head restraint. (→P. 152)
2
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
RAV4-HV_OM_OM42B81U_(U)