Child Restraint System Fixed With A Seat Belt; Installing Child Restraint System Using A Seat Belt; Rear-Facing — Infant Seat/Convertible Seat - Toyota Mirai 2017 Owner's Manual

62
1-1. For safe use

Child restraint system fixed with a seat belt

A child restraint system for a small child or baby must itself be prop-
erly restrained on the seat with the lap portion of the lap/shoulder belt.
◆
Installing child restraint system using a seat belt (child
restraint lock function belt)
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
■
Rear-facing — Infant seat/convertible seat
1
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
2
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
3
Fully extend the shoulder belt
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.