Checking How Long The Server Has Been Running - Sun Microsystems Netra T1 AC200 Product Notes

Extra LOMlite2 lom> prompt commands
The Netra T1 AC200 and DC200 servers have a LOMlite2 device on the system
board. This provides management facilities that enable you to:
Power the system up or down.
Monitor the system's temperature and the status of its power supply, fans, supply
rails, fault LED and alarms even when the system is powered down.
Configure the system to restart automatically after a lock-up.
The LOMlite2 commands are documented in Chapter 8 of the Netra T1 AC200 and
DC200 Server User's Guide (part number 806-5978-10). However, there is some
functionality that was added after the user's guide went to print. This is
documented below.
Checking How Long the Server Has Been
Running
To find out how long it is since the last system reset, type:
lom> date
or:
lom> showdate
2 Netra T1 AC200 and DC200 Server Release Notes • October 2000