Auto Channel Switch - Uniden POLARIS Owner's Manual

POLARIS_UT888ZL_UT01888ZA_0
3-F. AUTO CHANNEL SWITCH
This feature is to allow you to disable the automatic channel change that
happens when receiving a DSC call. This feature is useful when
engaged in bridge – to – bridge or other safety related calls. When you
have completed these calls, all of the incoming DSC calls received are
available in the call log.
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
SETUP
3. Rotate the PUSH – SELECT knob to
select
4. Press the PUSH – SELECT knob,
and the following screen appears.
5. If you want to change this mode to
OFF , you can change it by rotating
the PUSH – SELECT knob.
(Default is set as
6. Press the PUSH – SELECT knob
and the POLARIS returns to the
channel display screen.
10/3/02 4:18 PM
, the SETUP menu appears.
AUTO.CH.SW
.
ON
.)
Page 49
HI
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
FIPS
USER MMSI
GROUP MMSI
U.I.C.
DIRECTORY
AUTO.CH.SW
ON
OFF
ON
OFF
HI
MEM
TELEPHONE
49
CAN
CAN