Position Send - Uniden POLARIS Owner's Manual

POLARIS_UT888ZL_UT01888ZA_0
1-E. POSITION SEND
This radio has the ability to send the position of your vessel to another
vessel using a VHF marine radio equipped with DSC.
Note: Position send is only available when it is connected to the
GPS.
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
DSC CALL
appears.
3. Rotate the PUSH – SELECT knob to
select
4. Press the PUSH – SELECT knob,
and the individual directory appears.
5. Rotate the PUSH – SELECT knob to
select the name to send your position
information.
6. Press the
the following screen appears.
Confirm if the name and address is
correct. Press the PUSH – SELECT
knob to select
7. When the calling radio receives an
acknowledgment, the following
screen appears.
10/3/02 4:18 PM
, the DSC CALL menu
POS.SEND .
PUSH – SELECT knob,
SEND .
Page 27
HI
SHIP-SHIP
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
INDIVIDUAL
GROUP
ALL SHIPS
POS.REQUEST
POS.SEND
STANDBY
KENT NEWMAN
PAUL HUBER
JUNE BRAWLEY
EXIT
POS.SEND
KENT NEWMAN
654321000
SEND
CANCEL
POS.REPLY
06/15 03:00P
KENT NEWMAN
70.00.000 N
110.00.000 E
27
CAN