UT910ZH (OCEANUS) OM 0811
2-D. AUTO CHANNEL SWITCH
This feature is to allow you to disable the automatic channel change that
happens when receiving a DSC call. This feature is useful when
engaged in bridge – to – bridge or other safety related calls. When you
have completed these calls, all of the incoming DSC calls received are
available in the call log.
1.
Press SELECT at
Press CH M three times to select
2.
AUTO CH SW
3.
Press SELECT to enter the setting
mode.
4.
If you want to change this mode to
off
, you can change it by pressing
CH M once. (Default is set as
5.
Press SELECT. The radio returns to
the
AUTO CH SW
8/11/03
10:46 AM
SETUP
.
.
ON
.)
screen.
40
Page 40