POLARIS_UT888ZL_UT01888ZA_0
8.
The
POLARIS returns to the
following screen.
3-I. WHAM
This feature, from the setup menu, will allow you to connect the WHAM.
Note:
When you use the WHAM in addition to the POLARIS wired
mic, please set the BASE ID for the WHAM the same as the
POLARIS. (Please refer to the Owners Manual for the WHAM).
1.
Press and hold H/L/MENU for
2 seconds.
2.
Press the PUSH – SELECT knob at
SETUP
3.
Press the PUSH – SELECT knob at
WHAM
4.
Press the PUSH – SELECT knob,
and the following screen appears.
10/3/02
4:18 PM
, the SETUP menu appears.
, the WHAM menu appears.
Page 55
CH01
CH02 TELEPH
CH03 TELEPH
CH04 INTL
CH05 VTS
CH06 SAFETY
HI
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
U.I.C.
DIRECTORY
AUTO.CH.SW
POS.REPLY
CH TAG
WHAM
BASE ID
LINK CH
EXIT
55
CAN