Position Request - Uniden POLARIS Owner's Manual

POLARIS_UT888ZL_UT01888ZA_0
5. Rotate the PUSH – SELECT knob to
select the nature of your call
( URGENCY
Note: ROUTINE
previously selected channel.
6. Press the PUSH – SELECT knob to
transmit the ALL SHIPS DSC signal.
7. When sending either an
SAFETY
automatically move to channel 70
until all of the data is received.
8. After selecting
ALL SHIPS call is transmitted, the
POLARIS will switch to Channel 16.
You should wait a few minutes before
transmitting the ALL SHIPS call
information.
1-D. POSITION REQUEST
This radio has the ability to request the position of an individual vessel
that is registered in the DIRECTORY.
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
DSC CALL
appears.
10/3/02 4:18 PM
, SAFETY , ROUTINE
calls tune to the
URGENCY
message, all radios will
URGENCY or SAFETY
, the DSC CALL menu
25
Page 25
URGENCY
SAFETY
ROUTINE
).
EXIT
ALL SHIPS
URGENCY
SEND
CANCEL
or
TX HI CAN
DSC
ALL SHIPS
06/15 03:00P
012345678
URGENCY
HI CAN
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT