Unit Description; Front Panel - Fagor Dro NV-300T Installation Manual

1.

UNIT DESCRIPTION

This NV-300T / NV-301T DRO is designed for industrial environments,
especially on lathes
It can display the position of two axes or one axis and the combination of the
second axis with a third one.
1.1

FRONT PANEL

rd
3 display
Each axis display has eight 14.1mm high LEDs and another one for the minus
sign (-).
ABS-This lamp stays on when operating in absolute mode and off when in
incremental mode. To access or quit this mode, use the
Φ Φ Φ Φ Φ -
This lamp stays on when operating in diameter mode. In this mode, the
DRO displays twice the actual axis movement. To access it or quit it, use
the
HOLD- This lamp comes on when "freezing" the axis position by
pressing
NV-300T/301T Man: 9910 Soft: 2.xx
key.
and the axis key.
key.
Installation Manual - Page: 7