Fagor Dro NV-300T Installation Manual page 5

Working environment
This unit is ready to be used in Industrial Environments complying with the
directives and regulations effective in the European Community
Install the unit in the right place
It is recommended, whenever possible, to instal the DRO so its power switch
of the back panel is at a distance between 0.7 m (27.5 inches) and 1.7 m (5.6
ft) off the floor and away from direct sunlight, hot air, coolants, chemical
products, blows as well as from relays, or high electromagnetic fields (about
0.5m or 20 inches) that could damage it.
This unit complies with the European directives on electromagnetic
compatibility. Nevertheless, it is recommended to keep it away from sources
of electromagnetic disturbance such as.
- Powerful loads connected to the same AC power line as this equipment.
- Nearby portable transmitters (Radio-telephones, Ham radio transmitters).
- Nearby radio / TC transmitters.
- Nearby arc welding machines.
- Nearby High Voltage power lines.
- Disturbance generating elements of the machine.
- Etc.
Safety symbols
Symbols which may appear on the manual
WARNING. symbol
It has an associated text indicating those actions or operations may hurt
people or damage products.
Symbols that may be carried on the product
WARNING. symbol
It has an associated text indicating those actions or operations may hurt
people or damage products.
"ELECTRICAL SHOCK" symbol
It indicates that point may be under electrical voltage
"GROUND PROTECTION" symbol
It indicates that point must be connected to the main ground point of
the machine as protection for people and units.
Page: 4 - Installation Manual NV-300T/301T Man: 9910 Soft: 2.xx