Table of Contents
Advertisement
INCH-
This lamp stays on when working in inches and off when doing
it in millimeters. To access it or quit it, press
This lamp stays on during machine reference search . To access
it or quit it, press
TOOL-
This lamp stays on when setting the tool.
"PROBE" This lamp is not used on this model.
er
3
display The rightmost digit shows a "1", a "2" or is off to indicate that
the Z axis display (2nd one) corresponds to "Z
combination of "Z
This selection rotates by pressing
"tool" followed by the number of the active tool corresponding
to the XZ coordinates shown on the other displays.
Keys to select the first or second axis respectively.
Key to select whether the 2nd display corresponds to "Z
the combination of "Z
the rightmost digit of the 3rd display rotates from "1" to "2" and off
respectively.
Is used for carrying out the home (reference) search.
Is used for rotating from the incremental to the absolute mode and vice
versa
Is used to turn the display off while keeping track of the axes position
at all times. This key must be pressed before turning the unit's power off
by the main switch on the back of the unit.
Is used to validate an operation.
Is used to cancel or abort an operation already initiated.
Page: 2 - Operation Manual
key.
+Z
" respectively.
1
2
+Z
" respectively. Every time this key is pressed,
1
2
NV-300T/301T Man: 9910 Soft: 2.xx
", "Z
" or to the
1
2
. It also shows the text
", "Z
" or to
1
2
Hide quick links:
Advertisement
Table of Contents
