Storage - Cornelius Triton 200 HC Manual Operation


2.1

Storage

Avoid excessive temperature fluctuations as condensate may form, which in turn may cause damage
to the unit or to the components.
The permissible storage temperature is -10 °C to +50 °C.
The acclimatization period is 6 hours.
Caution!
Damage due to improper storage
Dirt or moisture entering a unit, as well as certain weather conditions (e.g. condensate
forming at the unit, sunlight) will cause damage to the unit and its components.
•
•
•
•
Caution!
Risk of electrostatic charge!
Improper handling or storage may result in electrostatic charges.
•
•
•
•
Caution!
Component damage due to material ageing
Material can age due to long storage periods, thereby affecting the material's properties (e.g.
plastics and seals may become brittle). The properties of lubricants may change due to long
storage periods.
•
Caution!
Component damage due to freezing liquids
Ambient temperatures that are below freezing will lead to the freezing of any water or
cleaning agent residue remaining inside the unit. This will lead to damage to internal
components.
Before shipment, storage or relocation of the unit, the unit is to be cleaned and the cleaning
solution is to be fully drained from the unit.
Cornelius Deutschland GmbH
Document no: TD1011602EN
Version A, 04.07.2019, Index 0
Protect the unit and its components by storing the unit in a clean and dry place, and
by ensuring stable
ambient conditions.
If possible, store the unit in its original packaging. Unpacked units must be covered
with a dustproof cover.
No condensate must form under the cover.
If possible, store units and/or any electronic components in their original packaging.
Keep units and/or electronic components away from charged objects, fields and
insulators.
Avoid electrostatic charges when removing packaging and/or handling electronic
assemblies and components by working at an ESD protected workstation or work
area.
When working at the unit or its components wear a grounding (antistatic) wrist strap
at the very least and wear antistatic gloves if necessary.
Check the assemblies and components for damage before each use/before installing
them. Do not install assemblies or components that show visible signs of ageing.
TRITON 200 HC
Manual operation undercounter cooler
Triton 200 HC
Page 8