Siemens RDF800KN Series Manual page 27

Remote configuration
RDF800KN..,
RDF800KN/VB only
Siemens
Smart Infrastructure
All DIP switches must be set to OFF (remote configuration, factory setting) in order
to select an application using the commissioning tool.
Remote configuration, using one of the following tools (factory
set)
·
Synco ACS
·
ETS4
For more information, see the following sections:
·
Section 3.4.1 "Applications for fan coil systems (RDF800KN..,
RDF800KN/VB only)";
·
Section 3.4.2 "Applications for universal systems (RDF800KN..,
RDF800KN/VB only)";
·
Section 3.4.3 "Applications for heat pump systems (RDF800KN..,
RDF800KN/VB only)";
·
Section 3.6.6 "Chilled/heated ceiling and radiator applications
(RDF800KN.., RDF800KN/VB only)".
RDF800KN.., RDF800KN/VB, RDD810KN/NF Basic documentation
DIP switches
27 / 94
CE1P3174en
2020-02-21