Advertisement
Step 1 6
16.1: Slide drawer bottom ( 1 9) into the slots inside drawer sides ( 1 6) & ( 1 7) as shown. Ensure
16.2: A ttach support drawer ( 21 ) onto drawer front ( 1 5). Ensure 1 x cam screw (B) is aligned
Fitting
16.3 : P lace drawer back ( 1 8) onto the top of constructed drawer box. Ensure the slot under
16.4 : S ecure drawer back ( 1 8) to the drawer box using 4x round head screws (U) as shown.
16.5 : Secure support drawer ( 21 ) to part ( 1 8) using 1 x round head screw (gg) as shown. Use a
U x 4
16.6 : Secure support drawer ( 21 ) to part ( 1 5) using 1 x cam lock (A) as shown. Use a pozi
screwdriver to turn fittings (A) clockwise to fix.
gg x 1
A x 1
Step 1 6.5
A
Step by step assembly instructions
the drawer bottom ( 1 9) are placed completely in the slot of drawer front ( 1 5).
correctly with the holes of mating parts before attaching.
drawer back ( 1 8) are aligned correctly with drawer bottom ( 1 9) before attaching.
Use a screwdriver to turn fittings (U) clockwise to fix
screwdriver to turn fittings (gg) clockwise to fix.
15
Step 1 6.6
17
19
15
Step 1 6.3
18
19
21
Step 1 6. 2
Step 1 6. 1
21
Step 1 6.4
16
U
Page :
8
1
IW-17-4007-81-2-R3
Advertisement
