Advertisement
Step By Step Assembly Instructions
Step 13
13 . 1 : Place hanger rail (P) onto hanger rail supports (H) on left & right sides of unit as shown.
13.2: Insert 4x wood shelf supports (C) into the pre-drilled holes on left and right side panels
13.3: Tilt removable shelf frame (9) to a suitable angle as shown in the picture so as to slide
Fitting
13.4: Slide removable shelf frame (9) into the unit. Ensure the holes on shelf are facing
P x 1
C x 4
(1) & (2) as shown.
it in.
down, then place it onto the pins of wood shelf support (C) as shown.
9
Page :
1 6
IW-17-4007-81-2-R3
Advertisement
