Summary of Contents for Bentley Designs 6-8 DINING EXTENSION TABLE 300X-3
Page 1
6-8 DINING EXTENSION TABLE Stock number: 300X-3 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools : (Included ) Please check the pack contents before attempting to assemble this product.
Page 2
3 x 2 Fittings and parts checklist Description Qty. Description Qty. Item Item Table frame Leaf frame Corovin storage bag Center rail Leg frame "O"ring Small allen key Steel dowel Grub screw Flat washer Lock washer Hex head bolt Large allen key Page : 2 IW- 1 7-300X-0 1 -2-R 4...
Page 3
Step by step assembly instructions Step 1 1 . 1 : Stand the table upright as shown. 1 . 2 : Extend the table by slide the top all the way out as shown. 1 . 3 : Remove leaf as shown. Step 1 .
Page 4
Step by step assembly instructions Step 2 2 . 1 : Lay all parts on a flat, stable, clean and soft surface. 2 .2 : Insert 8x steel dowels (A) into leg frame (3) by screwing fittings (A) into the inset fittings that are located on leg frame (3) as shown.
Page 5
Step By Step Assembly Instructions Step 3 Attach leg frame (3) to center rail (2) as shown. Ensure steel dowel (A) are aligned correctly with the holes of mating parts before attachinh. Page : 5 IW- 1 7-300X-0 1 -2-R 4...
Page 6
Step By Step Assembly Instructions Step 4 4. 1 : Attach the structure assembled in step 3 onto table frame ( 1 ) as shown. Ensure steel dowels (A) are aligned correctly with the holes of mating parts before attaching. 4.2 : Secure leg frame (3) to table frame ( 1 ) using 4x grub screws (B) as shown.
Page 7
Step By Step Assembly Instructions Step 5 Important : Ensure you have already locked the slides in Step 4 before righting the table. Note : When moving the table, remove leaf, close table top and lock the slides, then move by gripping or lifting the legs or underframe.
Page 8
Step By Step Assembly Instructions Step 7 7. 1 : Unlock the slides that were locked in Step 4. 7.2 : Extend the table by slide the top all the way out as shown. 7.3 : Place leaf frame (4) over the side aprons as shown. Slide leaf frame (4) to main table top until no gap is visible.
Page 9
Step by step assembly instructions Step 8 Remove the leaf 8. 1 : Unlock the slides that were locked in Step 7. 8.2 : Extend the table by slide the top all the way out as shown. 8.3 : Remove leaf (4) . Step 8.
Page 10
Step By Step Assembly Instructions Step 10 1 0. 1 : Carefully place corovin storage bag (5) with leaf frame (4) onto wood support storage under table top as shown. 1 0.2 : Close the table by slide the top all the way in as shown. Ensure the metal pins on both table frame ( 1 ) are aligned correctly with the mating holes before closing.
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.