Page 1
90CM SLATTED BEDSTEAD Stock number: 790X-42 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product.
Page 2
x 28 x 1 4 Page : 2 IW- 1 7-790X-53-3-R9...
Page 3
Fittings and parts checklist Description Qty. Description Qty. Item Item Headend Side rail Sprung slat Footend x 1 4 Left leg End plastic sleeve x 28 Right leg Wooden dowel Grub screw x 1 0 Ø8x8mm Ø 1 0x40 Steel dowel Allen key x 1 0 Ø7x52mm...
Page 4
Step By Step Assembly Instructions Step 1 1 . 1 : Lay all parts on a flat, stable, clean and soft surface. 1 .2 : Attach 4x steel dowels (B) into the pre-drilled holes on headend ( 1 ) as shown. Use a pozi screwdriver to turn fittings (B) clockwise to fix.
Page 5
Step By Step Assembly Instructions Step 3 3. 1 : Attach legs (3) & (4) onto footend (2) as shown. Ensure steel dowels (B) are aligned correctly with the holes of mating parts before attaching. 3.2 : Secure parts (3) & (4) to part (2) using 2x grub screws (A) as shown. Use allen key (D) to turn fittings (A) clockwise to fix.
Page 6
Step By Step Assembly Instructions Step 5 5. 1 : Insert 28x end plastic sleeves (7) onto both ends of 1 4x sprung slats (6) as shown. 5.2 : Attach the previously assembled 1 4x sprung slat sets into the pre-drilled holes on wood supports of both side rails (5) as shown.
Page 7
CAUTION: To Relocate Bed Page : 7 IW- 1 7-790X-53-3-R9...
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.