Advertisement
Quick Links
Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools :
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
This product takes approximately 60 MINUTES to assemble with 2 PEOPLE.
All assembly should be performed on a flat, stable, clean and soft surface.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product
The fitting pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
IMPORTANT: Retain these instructions for future reference.
DOUBLE WARDROBE
Pozi screwdriver and Phillips screwdriver
Pz 2 or Pz 3
( Included )
Ph 2
Stock number: 4007-82
Page :
1
IW-17-4007-81-2-R3
Advertisement
Related Manuals for Bentley Designs ATLANTA BR 480X 4007-82
Summary of Contents for Bentley Designs ATLANTA BR 480X 4007-82
- Page 1 DOUBLE WARDROBE Stock number: 4007-82 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools : Pozi screwdriver and Phillips screwdriver ( Included )
- Page 2 12 x 2 14 x 2 6 x 2 20 x 2 Page : 2 IW-17-4007-81-2-R3...
-
Page 3: Parts Checklist
Parts checklist Description Qty. Description Qty. Item Item Side frame left Back rail Side frame right Wood stopper Vertical back rail Leg frame Door frame left Drawer front Door frame right Drawer side left Back panel Drawer side right Drawer back Top frame Bottom frame Drawer bottom... - Page 4 Fittings checklist Description Qty. Description Qty. Item Item Cam Lock 1 Small grub screw x 10 Ø 1 5 x 1 3.5mm Ø7 x 7.5mm Cam screw Round head screw x 1 3 Ø7 x 44.5mm Ø4 x 40mm Wooden dowel x 1 2 Wood Shelf Support Ø6 x 30mm...
- Page 5 Step By Step Assembly Instructions Step 1 1 . 1 : Lay all parts onto a flat, stable, clean and soft surface. 1 .2 : Attach 1 2x cam screws (B) into the pre-drilled holes on side frames ( 1 ) & (2) as shown. Use a pozi screwdriver to turn fittings (B) clockwise to fix.
- Page 6 Step By Step Assembly Instructions Step 2 : Attach 8x small steel dowels (S) into top frame (7) & bottom frame (8) by screwing fittings (S) into the inset fittings that are located on part (7) & (8) as shown. Ensure the direction of the holes on fittings (S) are facing correctly as per diagram.
- Page 7 Step By Step Assembly Instructions Step 4 : Attach both back rails ( 1 2) onto vertical back rail ( 3 ) as shown. Ensure wooden dowels are aligned correctly with the holes of mating parts before attaching. Step 5 5.
- Page 8 Step By Step Assembly Instructions Step 6 6. 1 : Attach side frame right (2) onto parts ( 1 0),( 11 ) and ( 12 ) as shown. Ensure cam screws (B) and wooden dowels (G), (V) are aligned correctly with the holes of mating parts before attaching.
- Page 9 Step By Step Assembly Instructions Step 7 7.1 : Attach top frame (7) & bottom frame (8) onto side frames ( 1 ), (2) and top front rail ( 11 ), back rails ( 1 2) as shown. Ensure small steel dowels (S), wooden dowels (G) and wooden dowels (V) are aligned correctly with the holes of mating parts before attaching.
- Page 10 Step By Step Assembly Instructions Step 8 : Attach left runner (hh) and right runner (jj) onto the pre-drilled holes on side frames ( 1 ) & (2) using 6x varianta screws (mm) and 2x flat head screws (nn) as shown. Use a screwdriver to turn fittings (mm) &...
- Page 11 Step By Step Assembly Instructions Step 9 Attach back panels ( 6 ) onto back side of the unit using 58x round head screws (N) as shown. Use a screwdriver to turn fittings (N) clockwise to fix. Fitting N x 58 Page : IW-17-4007-81-2-R3...
- Page 12 Step By Step Assembly Instructions Step 1 0 10.1 : A ttach 8x steel dowels (dd) into leg frames ( 1 4) by screwing fittings (dd) into the inset fitting that are located on parts ( 1 4) as shown. Use a pozi screwdriver to turn fittings (dd) clockwise to fix.
- Page 13 Step By Step Assembly Instructions Step 11 11.1 : A ttach the structure assembled in Step 1 0 onto bottom frame (8) as shown. Ensure wooden dowels (G) are aligned correctly with the holes of mating parts before attaching 11.2 : S ecure parts ( 1 4) to part (8) using 8 x hex head bolts (F) as shown. Use allen key (Y) to turn fittings (F) clockwise to fix.
- Page 14 Step By Step Assembly Instructions Step 12 Attach doors (4) & (5) to side frames ( 1 ) & (2) by screwing 8x hex head bolts (E) into inset fittings that are located on parts ( 1 ) & (2) as shown. Ensure the holes on doors (4) & (5) are aligned correctly with the mating spring pins on side panels ( 1 ) &...
-
Page 15: Lateral Adjustment
Hinge adjustment instructions LATERAL ADJUSTMENT by screw adjustment. FRONT-TO-BACK by slackening and retightening the hinge-arm mounting screw. VERTICAL ADJUSTMENT via slots on mounting plate by slackening and retightening the screws on mounting plate Page : IW-17-4007-81-2-R3... - Page 16 Step By Step Assembly Instructions Step 13 13 . 1 : Place hanger rail (P) onto hanger rail supports (H) on left & right sides of unit as shown. 13.2: Insert 4x wood shelf supports (C) into the pre-drilled holes on left and right side panels (1) &...
- Page 17 Step by step assembly instructions Step 14 14.1 : Attach 2x small steel dowels (S) into drawer front ( 1 5) by screwing fittings (S) into the inset fittings that are located on part ( 1 5) as shown. Ensure the direction of the holes on fittings (S) are facing correctly as per diagram.
- Page 18 Step by step assembly instructions Step 1 6 16.1: Slide drawer bottom ( 1 9) into the slots inside drawer sides ( 1 6) & ( 1 7) as shown. Ensure the drawer bottom ( 1 9) are placed completely in the slot of drawer front ( 1 5). 16.2: A ttach support drawer ( 21 ) onto drawer front ( 1 5).
- Page 19 Step By Step Assembly Instructions Step 1 7 Insert the assembled drawer into the unit as shown. Assembly is complete. Page : IW-17-4007-81-2-R3...
-
Page 20: Care And Maintenance
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.