Advertisement
Quick Links
1 22CM, 1 35CM AND 1 50CM HIGH BEDSTEAD
Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools :
Please check the pack contents before attempting to assemble this product. A full checklist of components is given
in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.
This product takes approximately 60 MINUTES to assemble with 2 PEOPLE.
All assembly should be performed on a flat, stable, clean and soft surface.
This product is HEAVY , it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product
The fitting pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
IMPORTANT: Retain these instructions for future reference.
Pozi screwdriver and Phillips screwdriver
Pz 2 or Pz 3
Stock number: 480X-5 1 /53/54
(Included)
Ph 2
Page : 1
IW- 1 7-480X-54-4/5/7-R8
Advertisement
Related Manuals for Bentley Designs 480X-51
Summary of Contents for Bentley Designs 480X-51
- Page 1 1 22CM, 1 35CM AND 1 50CM HIGH BEDSTEAD Stock number: 480X-5 1 /53/54 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools : (Included) Pozi screwdriver and Phillips screwdriver...
- Page 2 7 x 28 6 x 28 8 x 1 4 Fittings and parts checklist Item Description Qty. Item Description Qty. Headend Adjustable metal centre leg Footend Sprung slat x 28 Side rail End plastic sleeve x 28 x 1 4 Metal centre rail Centre plastic sleeve Allen key...
- Page 3 Step By Step Assembly Instructions Step 1 1 . 1 : Lay all parts on a flat, stable, clean and soft surface. 1 .2 : Attach 8x steel dowels (C) onto headend ( 1 ) and footend (2) by screwing fittings (C) into the inset fittings that are located on parts ( 1 ) and (2) as shown.
- Page 4 Step By Step Assembly Instructions Step 2 2. 1 : With help of assistant, stand headend ( 1 ) and footend (2) upright. Carefully attach headend ( 1 ) and footend (2) onto both ends of both side rails (3) as shown. Ensure steel dowels (C) are aligned correctly with the holes of mating parts before attaching.
- Page 5 Step By Step Assembly Instructions Step 3 3. 1 : Remove the bracket from adjustable metal center leg (5) by using allen key (E) to turn 2x bolts counterclockwise as shown. Fitting 3.2 : Place adjustable metal center leg (5) onto metal center rail (4) then secure the bracket back onto metal center leg (5) using the previously removed 2x bolts as shown.
- Page 6 Step By Step Assembly Instructions Step 4 Attach strapping band (F) onto the pre-drilled holes on side rail (3) using 4x round head screws (G) as shown. Use a screwdriver to turn fittings (G) clockwise to fix. Fitting F x 1 G x 4 Step 5 5.
- Page 7 CAUTION: To Relocate Bed Page : 7 IW- 1 7-480X-54-4/5/7-R8...
-
Page 8: Care And Maintenance
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.