Summary of Contents for Bentley Designs 5681 Series
Page 1
EXTENSION DN TABLE Stock number: 568 1 -X-X Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools : Included Pozi screwdriver and Phillips screwdriver...
Page 2
2 x 2 3 x 2 4 x 2 Fittings and parts checklist Description Qty. Description Qty. Item Item Table top Leg left Apron Leg right Wood dowel Steel dowel Ø 1 0x40mm Ø7x70mm Steel dowel Allen key Ø 1 0x48.5mm M5x30x 11 0mm Grub screw Housing...
Page 3
Step By Step Assembly Instructions Step 1 Remove transport rails on ends of table top ( 1) by using a phillips screwdriver to turn 8x round head screws counterclockwise as shows. transport rail transport rail Page : 3 IW- 1 7-568 1 -0 1-X -R 2...
Page 4
Step By Step Assembly Instructions Step 2 2 . 1 : Lay all parts on a flat, stable, clean and soft surface. 2 .2 : Insert 4x wood dowels (A) into the pre-drilled holes on aprons (2) as shown. 2 .3 : Attach 8x steel dowels (B) into legs ( 3 ), (4) by screwing fittings (B) into the inset fittings that are located on legs (3), (4) as shown.
Page 5
Step By Step Assembly Instructions Step 3 3.1: I nsert 8x housings (G) into the pre-drilled holes on aprons (2) by as shown. Ensure the direction of the holes on fittings (G) are facing correctly as shown. 3.2: Attach legs left (3) and legs right (4) onto apron (2) as shown. Ensure steel dowels (B) and wood dowels (A) are aligned correctly with the holes of mating parts before attaching.
Page 6
Step By Step Assembly Instructions Step 4 step 3 4. 1 : Attach the structures assembled in onto table top ( 1 ) as shown. Ensure steel dowels (E) are aligned correctly with the holes of mating parts before attaching. step 3 4.2: Secure structures assembled in to table top ( 1 ) using 8x grub screws (D) as...
Page 7
Step By Step Assembly Instructions Step 5 5.1 : Extend both sides of the main table tops, the leaf automatic up. 5.2 : Slide the table inwards the leaf until no gap is visible. Note: Ensure the metal pins are aligned to the holes on the main table tops and the leaf before closing the table.
Page 8
Step By Step Assembly Instructions Step 6 6. 1 : Extend both sides of the main table tops, the leaf automatic down. 6. 2 : Slide the table inwards the leaf until no gap is visible. Note: Ensure the metal pins are aligned to the holes on the main table tops and the leaf before closing the table.
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.