Page 1
1 22CM SLATTED BEDSTEAD Stock number: 790X-41 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product.
Page 3
Fittings and parts checklist Description Qty. Description Qty. Item Item Sprung slat Headend x 28 Left side rail Center rail Right side rail Adjustable metal center leg End plastic sleeve Footend x 28 Left leg Centre plastic sleeve x 14 Right leg Grub screw Bracket...
Page 4
Step By Step Assembly Instructions Step 1 1.1 : Lay all parts on a flat, stable, clean and soft surface. 1. 2: Attach 1 x bracket (A) to the pre-drilled holes on headend ( 1 ) using 4x flat head screws (B) as shown.
Page 5
Step By Step Assembly Instructions Step 3 : Attach 6x steel dowels (C) into the pre-drilled holes on left & right legs (5) & (6) as shown. Use a pozi screwdriver to turn fittings (C) clockwise to fix. Fitting Inset fitting C x 6 Inset fitting Inset fitting...
Page 6
Step By Step Assembly Instructions Step 4 4.1: Attach legs (5) & (6) onto footend (4) as shown. Ensure steel dowels (C) and wooden dowels (F) are aligned correctly with the holes of mating parts before attaching. 4.2: Secure parts (5) & (6) to part (4) using 2x grub screws (D) as shown. Use allen key (E) to turn fittings (D) clockwise to fix.
Page 7
Step By Step Assembly Instructions Step 6 6. 1: Remove the bracket from adjustable metal center leg (9) by using allen key (E) to turn 2x hex head bolts counterclockwise as shown. 6.2: Place adjustable metal center leg (9) onto center rail (8) then secure the bracket back onto metal center leg (9) using the previously removed 2x hex head bolts as shown.
Page 8
Step By Step Assembly Instructions Step 7 7.1: Insert 28x end plastic sleeves ( 1 0) onto one end of 28x sprung slats (7) and thereafter insert the other ends of all parts (7) into both sides of 1 4x center plastic sleeves ( 11 ) as shown. 7.2: Secure the previously assembled 1 4x sprung slat sets into the pre-drilled holes on wood supports of side rails (2) &...
Page 9
CAUTION: To Relocate Bed Page : 9 IW-17-790X-53-7-R2...
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.