Page 1
35CM- 1 50CM PANEL BED Stock number: 4207-43/44 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product.
Page 2
3 x 2 4 x 2 5 x 2 6 x 2 8 x 28 10 x 28 11 x 14 Page : 2 I W- 1 7-4 2 06-5 1 -X-0...
Page 3
Fittings and parts checklist Description Qty. Description Qty. Item Item Head board Metal centre rail Sprung slat Foot board x 28 Adjustable metal center leg Side rail Leg frame End plastic sleeve x 28 Support leg left Center plastic sleeve x 14 Support leg right Wooden dowel...
Page 4
Step By Step Assembly Instructions Step 1 1 . 1 : Lay all parts on a flat, stable, clean and soft surface. 1 .2 : Attach 2x brackets (A) onto the pre-drilled holes on head board ( 1 ) and foot board (2) using 8x flat head screws (B) as shown.
Page 5
Step By Step Assembly Instructions Step 2 : Attach 8x steel dowels (C) and 8x steel dowels (D) onto head board ( 1 ) and foot board (2) by screwing fittings (C), (D) into the inset fittings that are located on parts ( 1 ), (2) as shown. a pozi screwdriver to turn fittings (C), (D) clockwise to fix.
Page 6
Step By Step Assembly Instructions Step 3 3. 1 : Attach the legs frame (4) onto head board ( 1 ) and foot board (2) as shown. Ensure wooden dowels (F) are aligned correctly with the holes of mating parts before attaching. 3.2 : Secure parts ( 4 ) to parts ( 1 ) &...
Page 7
Step By Step Assembly Instructions Step 4 4.1 : Attach 8x steel dowels (C) onto side rails (3) by screwing fittings (C) into the inset fittings that are located on parts ( 3 ) as shown. Use a pozi screwdriver to turn fittings (C) clockwise to fix.
Page 8
Step By Step Assembly Instructions Step 5 5.1 : With help of assistant, stand the structure assembled in Step 3 upright. Carefully attach the structure assembled in Step 3 onto both ends of both side rails (3) as shown. Ensure steel dowels (C),(D) are aligned correctly with the holes of mating parts before attaching.
Page 9
Step By Step Assembly Instructions Step 6 : Secure parts ( 4 ) to parts ( 5 ) & (6) using 8x hex head bolts (G) as shown. Use allen key (H) to turn fittings (G) clockwise to fix. Fitting G x 8 H x 1 Page : 9...
Page 10
Step By Step Assembly Instructions Step 7 7 . 1 : Remove the bracket from adjustable metal center leg (9) by using allen key (H) to turn 2x hex head bolts counterclockwise as shown. 7 . 2 : Place metal center rail (7) onto adjustable metal center leg (9) then secure the bracket back onto metal center leg (9) using the previously removed 2x hex head bolts as shown.
Page 11
Step By Step Assembly Instructions Step 8 8 . 1 : Insert 28x end plastic sleeves ( 10 ) onto one end of 28x sprung slats (8) and thereafter insert the other ends of all parts (8) into both sides of 1 4x center plastic sleeves ( 11 ) as shown. 8 .
Page 12
CAUTION: To Relocate Bed CAUTION: CAUTION: DO NOT PULL ON SIDE RAIL LIFT TO RELOCATE BED Page : I W- 1 7-4 2 06-5 1 -X-0...
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.