Summary of Contents for Bentley Designs 480 83 Series
Page 1
TRIPLE WARDROBE Stock number: 480X-83 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools : Pozi screwdriver and Phillips screwdriver (Included)
Page 2
1 4 x 2 1 5 x 2 1 6 x 2 1 7 x 2 1 9 x 2 20 x 4 2 1 x 3 23 x 2 27 x 4 Page : 2 IW- 1 7-480X-80-3-R 16...
Parts checklist Description Qty. Description Qty. Item Item Left side panel Left drawer side Right side panel Right drawer side Left door Drawer back Right door Drawer bottom Center door Support drawer Top panel Removable shelf Bottom panel Back panel Back panel Fixed shelf Vertical front rail...
Page 4
Fittings and parts checklist Cam screw Steel dowel Cam lock x 1 4 Ø7 x 44.5mm Ø7 x 52mm Ø 1 5 x 1 2.5mm Steel dowel Grub screw Cloth bar support Ø7 x 72.5mm Ø 8 x 8mm Conformat screw Hex head bolt Varianta screw Ø7 x 50...
Page 5
Step By Step Assembly Instructions Step 1 1 . 1 Attach 1 4x cam screws (A) into the pre-drilled holes on left and right side panels ( 1 ) & (2) and vertical back rail ( 1 0) as shown.Use a pozi screwdriver to turn fittings (A) clockwise to fix. 1 .
Page 6
Step By Step Assembly Instructions Step 2 2. 1 : Attach 4x steel dowels (C) onto top panel (6) by screwing fittings (C) into the inset fittings that are located inside part (6) as shown. Use a pozi screwdriver to turn fittings (C) clockwise to fix.
Page 7
Fittings and parts checklist Step 3 3. 1 : Insert 23x dowels (Y) into rails (9), ( 11 ), ( 1 2 ), ( 1 3), ( 1 4), door stopper (29), (30) and 4x dowels (ee) into fixed shelf (8) as shown. 3.2: Attach door stopper (29), (30) onto fixed shelf (8) using 2x round head screw (dd) as shown.
Page 8
Step By Step Assembly Instructions Step 4 4.1: A ttach rails ( 11 ), ( 1 2), ( 1 3), ( 1 4) and fixed shelf (8) to left side panel ( 1 ) as shown. Ensure cam screws (A), dowels (ee) and dowels (Y) are aligned correctly with the holes of mating parts before attaching.
Page 9
Step By Step Assembly Instructions Step 5 5. 1 : Attach rail (9) to rail ( 11 ) and fixed shelf (8) as shown. Ensure dowels (Y) is aligned correctly with the hole of mating parts before attaching. 5.2: Secure rail (9) to all parts (8), ( 11 ) using 1 x conformat screw (H), 1 x round head screw (hh) as shown.
Page 10
Step By Step Assembly Instructions Step 6 6. 1: Attach right side panel (2) onto rails ( 11 ), ( 1 2), ( 1 3) and fixed shelf (8) as shown. Ensure cam screws (A), dowels (Y) and dowels (ee) are aligned correctly with the holes of mating parts before attaching.
Page 11
Step By Step Assembly Instructions Step 7 7. 1 : Attach top panel (6) onto side panels ( 1 ), (2), vertical rails (9), ( 1 0) & top rails ( 11 ), ( 1 2) as shown. Ensure steel dowels (C), dowels (Y) are aligned correctly with the holes of mating parts before attaching.
Page 12
Step By Step Assembly Instructions Step 8 8.1: A ttach bottom panel (7) onto side panels ( 1 ) & (2) as shown. Ensure steel dowels (D) are aligned correctly with the holes of mating parts before attaching. 8.2: Secure bottom panel (7) to all parts ( 1 ) & (2) using 4x grub screws (E) as shown. Use a allen key (K) to turn fittings (E) clockwise to fix.
Page 13
Step By Step Assembly Instructions Step 9 9. 1: Insert cross dowel (S) into the hole on top of each leg (27) as shown. Ensure the horizontal marking on each cross dowel is facing out as shown. 9.2: Insert threaded bolt (R) into the hole on each leg (27). Tighten threaded bolt (R) into the hole of cross dowel (S) that is already concealed in each leg (27) as shown.
Page 14
Step By Step Assembly Instructions Step 1 0 1 0. 1 Attach back panels (22), (23), (24) and (25) along outer edges onto back side of the unit using 52x round head screws (N) as shown. Use a screwdriver to turn fittings (N) clockwise to fix.
Page 15
Step By Step Assembly Instructions Step 11 11.1: Insert cloth bar rail (28) through the pre-drilled hole on support rail (26), then place cloth bar rail (28) onto cloth bar supports (F) on left and right sides of unit as shown. 11.2: Secure support rail (26) to top panel (6) using 2x hex head bolts (gg) as shown.
Page 16
Step By Step Assembly Instructions Step 1 2 : Attach doors (3), (4) and (5) to side panels ( 1 ), (2) and vertical front rail (9) by screwing 1 2x bolts (J) into inset fittings that are located on parts ( 1 ), (2) and (9) as shown. Ensure the holes on doors (3), (4) and (5) are aligned correctly with the mating spring pin on side panels ( 1 ) &...
HINGE ADJUSTMENT INSTRUCTIONS LATERAL ADJUSTMENT by screw adjustment. FRONT-TO-BACK by slackening and retightening the hinge-arm mounting screw. VERTICAL ADJUSTMENT via slots on mounting plate by slackening and retightening the screws on mounting plate Page : IW- 1 7-480X-80-3-R 16...
Page 18
Step By Step Assembly Instructions Step 1 3 1 3. 1 Attach 3x handles (L) to door (3), (4) & (5) using 3x round head bolts (M) as shown. Use a screwdriver to turn fittings (M) clockwise to fix. Fitting Step 1 3.
Page 19
Step By Step Assembly Instructions Step 1 4 : Attach 4x steel dowels (Q) by screwing fittings (Q) into the inset fittings that are located inside drawer fronts ( 1 5) as shown. Ensure the direction of the holes on fittings (Q) are facing correctly as per diagram.
Page 20
Step By Step Assembly Instructions Step 1 6 1 6. 1 : Attach drawer sides ( 1 6) & ( 1 7) to drawer fronts ( 1 5) as shown. Ensure steel dowels (Q) and dowels (ee) are aligned correctly with the holes of mating parts before attaching. 1 6.2 : Secure drawer sides ( 1 6) &...
Page 21
Step By Step Assembly Instructions Step 1 8 1 8. 1 : Place drawer backs ( 1 8) onto the top of constructed drawer boxes. Ensure the slots under backs ( 1 8) are aligned correctly with drawer bottoms ( 1 9) before attaching. 1 8.2: Secure drawer backs ( 1 8) to the drawer boxes using 8x round head screws (Z) as shown.
Page 22
Step By Step Assembly Instructions Step 20 20.1: Insert the assembled drawers into the unit as shown. 20.2: Insert 1 2x wood shelf supports (X) into the pre-drilled holes inside the unit as shown. 20.3: Slide removable shelves (2 1 ) into the unit. Ensure the holes on removable shelves (2 1 ) are facing down, then place removable shelves (2 1 ) onto the pins of wood shelf supports (X) Fitting as shown.
Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.