Mounting - dallmeier DMS 2400 Commissioning

Mounting

Stand-alone operation
►
Ensure a stable and horizontal surface.
►
Ensure 10 cm of free space at the front, rear and right side.
►
Connect the recorder as described on the following pages.
►
Commission the recorder as described on the following
pages.
Operation in 19" rack
►
Exclusively use the 19" holder provided by Dallmeier.
►
Insert the device into the 19" holder.
►
Use the housing feet as guidance.
►
Use the 4 screws delivered with the 19" holder.
►
Mount the housing in the 19" holder with the 4 screws.
►
Ensure that the ventilation slots are not covered.
►
Mount the device into the 19" rack.
►
Observe the instructions of the rack manufacturer.
►
Ensure 4 " (10 cm) of free space at the front, rear and
right side.
►
Connect the device as described on the following pages.
►
Commission the device as described on the following
pages.
6 www.dallmeier.com