Advertisement
Assembly & Operational Instructions
STEP 1: Unfold the FRONT FRAME(2) from the MAIN FRAME(1) and secure with the
LOCKING KNOB(15).
Adjust the STAND CAPS(3) to set the Folding Upper & Lower Body Cycle on
the floor.
STEP 2: Bolt the T KNOB(14) into the hub on the MAIN FRAME(1).
STEP 3: Clip the TIMER(20) onto the MAIN FRAME(1).
NOTE: There are two adjustment holes on each side of the PEDAL STRAPS(12).
Select the adjustment holes which allow your feet to be easily removed from
the PEDALS(11).
CAUTION: The surface of the crank housing may
become hot during use, so allow it to cool
before moving.
on the
LOAD ADJUSTMENT
To increase the intensity of your workout, turn the T KNOB(14) clockwise. To decrease
the resistance, turn the T KNOB(14) counterclockwise.
Read the cautions posted
Folding Upper & Lower Body
Caution Decal
(both sides)
Cycle.
2
Advertisement
