Advertisement
VLC/VLK-40F
Dakota Digital VLK Instrument Installation
For 1940 Ford car
Your new VLC/VLK-40F kit includes:
VLC Display
Installation Manuals
OR
VLK Display
CAT5 Cable
Power Harness
(4) Mounting
(VLC ONLY)
screws
Installation
1. Remove the four screws holding the clock to the glove box on the back side.
Manual 650409A
Advertisement
Table of Contents
Related Manuals for Dakota Digital VLC-40F
Summary of Contents for Dakota Digital VLC-40F
- Page 1 VLC/VLK-40F Dakota Digital VLK Instrument Installation For 1940 Ford car Your new VLC/VLK-40F kit includes: VLC Display Installation Manuals VLK Display CAT5 Cable Power Harness (4) Mounting (VLC ONLY) screws Installation 1. Remove the four screws holding the clock to the glove box on the back side.
- Page 2 2. Remove the clock assembly and rear housing. 3. Carefully position the new clock from the backside to avoid scratching the chrome. With the four screws provided, secure the new clock to your original glove box. Manual 650409A...
- Page 3 4. Connect the CAT5 cable to the new clock; with the VLC, connect the power harness as well. Take care when routing this cable to the control box. 5. Refer to the Operating Manual to complete the clock setup. VLK shown WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Need help?
Do you have a question about the VLC-40F and is the answer not in the manual?
Questions and answers