Operation Starting; Using The Mode - LG AG16GB Series Owner's Manual

Hide thumbs Also See for AG16GB Series:
Table of Contents

Advertisement

Operation starting

Press the Start/Stop button to start the
operation.
NOTE
• When the operation is started for the first
time, the appliance operates in Normal mode.
• The most recently used mode is
memorized if the power supply is cut off
due to a reason such as a power failure.
However, the last mode was Turbo mode,
the appliance operates in Normal mode.
• When the operation begins, the display
of sensor ready (
approximately 30 seconds.

Using the Mode

• Each time you press the Mode button,
the mode changes in the following order:
Normal→Silent→Smart→Turbo.
) will appear for
Normal Mode
Purifies indoor air at a desired speed.
Smart Mode
Adjusts wind direction and strength
automatically according to the level of overall
air quality.
NOTE
• You can adjust the direction by pressing
the left/right Swing or up/down Swing
button during Smart operation.
• Since the speed is adjusted automatically
according to overall air quality in Smart,
the Speed button is inoperable.
Turbo Mode
The product operates powerfully for 30
minutes to purify indoor air promptly.
NOTE
• The mode changes to the previously mode
after the appliance is operated in Turbo for
30 minutes.
• When the Speed button is pressed, the
mode will change to Normal.
Silent Mode
The appliance operates with the minimum
noise.
NOTE
• The input of the left/right Swing or up/
down Swing buttons is not available
during Silent.
• When the Speed button is pressed, the
mode will change to Normal.
19

Advertisement

Table of Contents
loading

Table of Contents