Table of Contents
Advertisement
Control Panel
Start/Stop Button
You can start or stop the operation.
Mode Button
Use it to set the mode.
Speed Button
Use it to adjust the air flow of the air
purifier.
• Wi-Fi Function
– Before appliance registration:
Press and hold the button for
more than 3 seconds to activate
the Wi-Fi registration mode.
– After appliance registration:
Press and hold the button
for more than 3 seconds to
control the appliance using
a smartphone that has it
registered.
– Wi-Fi function off: Press and
hold the Start/Stop button and
the Speed button at the same
time for more than 3 seconds.
Indicator Button
Allows you to check the concentration
of particles in the air by the size of
dust particles.
16
Off Timer Button
Allows you to use the Off Timer
function.
• Pressing and holding it for 3
seconds or more locks or unlocks
the control panel buttons. (Refer
to Locking the Control Panel
Buttons)
Swing Button
Allows you to adjust the wind direction
to up and down.
Swing Button
Allows you to adjust the wind direction
to the left and the right.
• You can adjust the brightness of the
screen by pressing it for 3 seconds
or more. (Refer to Turning off the
Screen)
Receiver for remote controller
signal
If the receiver for remote controller
signal is blocked, the remote
controller may not operate.
Be careful not to block it.
Advertisement
Table of Contents
